 |
 |
|
|
 |
 |
|
|
|
NICK ZIROLI GIANT SCALE PLANS for Ron Weiss 1/3 1930 FLEET
Wingspan-112" Length-84"
Weight-26 - 28 lbs Engine-62 - 100 cc gas
The giant scale 1930 FLEET plan set is 1/3 scale and consists of three large sheets that clearly illustrate all structure. The 1930 FLEET plan shows the installation of fixed wire gear, servos and Zenoah G-62 engine and features two, two piece wings. The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com forums for Ron Weiss plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon - Fri EST 631-467-4765. The plan includes full-size templates for all the required parts allowing you to cut a complete “kit” before you start construction. If you don’t have the tools or time to cut your own kit Nick Ziroli Plans now carries a laser cut short wood kit for the 1930 FLEET plan that contains all the parts that you would otherwise have to cut by hand from balsa and plywood, it does not include sheet or stick wood or hardwood, balsa blocks. There are many kit cutters such as Precision Cut Kits that make a very fine full wood kit that contains all the sheet, stick wood and balsa, hard wood blocks and laser cut parts to build the complete model from our plans. The plans have instructions and building notes on the plans. If you choose an engine not shown on the plans you should have it on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with cloth such as Sits system or solartex an iron on cloth covering. Nick Ziroli Plans has building and scale accessories available for the 1930 FLEET.
|
 |
|
|
|
||||