NICK ZIROLI GIANT SCALE PLANS for 1/8 B-25 Mitchell

Wingspan-101"    Length-78"

Weight-28 - 36 lbs    Engine-(2) 26 - 38 cc gas 

The giant scale B-25 Mitchell plan set is 1/8 scale and consists of four large sheets that clearly illustrate all structure as well as showing installation of flaps and retracts. The B-25 Mitchell plan shows the installation of Robart retracts, fixed wire gear, servos and Zenoah G-23 engine and features three piece wing.  The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com  forums for Nick’s plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon - Fri EST 631-467-4765. The plan includes full-size templates for all the required parts allowing you to cut a complete “kit” before you start construction. If you don’t have the tools or time to cut your own kit Nick Ziroli Plans now carries a laser cut short wood kit for the B-25 Mitchell plan that contains all the parts that you would otherwise have to cut by hand from balsa and plywood, it does not include sheet or stick wood or hardwood, balsa blocks. There are many kit cutters such as Precision Cut Kits that make a very fine full wood kit that contains all the sheet, stick wood and balsa, hard wood blocks and laser cut parts to build the complete model from our plans. The plans have a separate instruction guide and building notes on the plans. If you choose gear or an engine not shown on the plans you should have them on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with1oz fiberglass cloth and ZAP Z-poxy finishing resin and elevator and rudders with cloth covering such as solartex. Nick Ziroli designs are equally at home at the local sport flying field or the winner’s circle at prestigious scale events such as Top Gun and the Scale Master’s; you can add as much detail as you like. Nick Ziroli Plans has building and scale accessories available for the B-25 Mitchell. Over the years, Nick’s designs have gained the enviable reputation for being among the most “flyable” giant scale models available. 

   

     More Pictures               Tech Specs

   
Qty. Description Price
Plan (101in Wingspan) $ 70.00
Short Wood Kit (all cut parts balsa and plywood) $ 345.00
Full Wood Kit (all cut parts balsa and plywood) $ 485.00
Fiberglass Cowls (Pair) $ 75.00
Canopy Set, All Clear Parts $ 70.00
6 3/4in Dummy Radial Engines (Pair) $ 16.00
5 3/4in Dummy engine FTE Cast Resin (pair) $ 44.00
Aluminum Wing Tube 1in x 24in $ 23.00
1in Spinner Nut (2 Required, Note - Enter engine, prop size and type in Special Instruction box at checkout) $ 37.90
Zenoah G26 Gasoline Engine (2 Required) $ 324.95
Robart Tri-Gear Set Retracts #163 $642.95
5 1/2in Dubro Foam Tire on Aluminum Hub (each) $ 38.00
5 1/2in Dubro Rubber Tire on Aluminum Hub (each) $ 38.00
Robart 5 1/2in 8 spoke Tuff Treads (each) $92.95
Robart 5 1/2in 10 spoke Tuff Treads (each) $92.95
3 1/2in Nose Wheel Robart #116 (each) $8.47
Air Kits: Robart #157VRX $92.95
UP2 Retract + Door Control Valve $ 99.50