Scale: 1/5

Inches to the foot: 2.4" - 1'

Length: 70"

Weight: 24 - 32 lbs

Wing loading: 37 - 50 oz/sqft

Wing area: 1500 sq.in.

Wing span: 101"

Wing incidence at root: +2 1/2 degrees

Stab incidence: + 1 degree

Dihedral: 3 1/4" under w16

Power: 50 - 75 cc gas

Washout at wing tip:  2 to 3 degrees built in with jig

Aileron throws: 3/4" up & 5/8" down

Elevator throws: 1" up & 1" down

Rudder throws: 2" to right & 2" to left

Flap degrees down: 40 - 50

Cowl length: 5 5/8"

Cowl height front: 10"

Cowl height rear: 10 1/2"

Cowl width front: 10"

Cowl width rear: 10 1/2"

Engine offset degrees: 0 right, 0 down

CG location: 5 3/4" back from leading edge of the wing center section with gear down

Ziroli cowls and or nose: yes

Ziroli canopy: yes

Ziroli plastic accessories: yes

Engine:50 - 75 cc gas

Spinner:  3 1/4" AT-6

Fuel tank: 32oz rectangle

Wing Tube: 1 1/4" X 30"

Control Horns: (4) 1/2", (2) 3/4"

Hinges: 24

Covering: 1oz fiberglass cloth & epoxy resin

Retracts Main:  yes

Retracts Nose: no

Retracts Tail: yes

Main gear struts:  n/a

Tail gear strut: no

Air Kit:  yes

Wheels Main:  5"

Wheel Nose: n/a

Wheels Tail: 2 1/2"

Radio channels:  6 or more

Servos: Flaps (2)150-200oz MGBB, Ailerons (2)90+oz BB, Elevators (2)90+oz BB, Rudder (1)120+oz BB, Gear (1)50oz, Throttles (1)50oz BB

MG-metal gear BB-ball bearing