|
|
|
||||||||||||||||||||||||||||||||||||||
1930 Fleet Technical Specifications
The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. Building notes are on the plans. The 1930 FLEET plan set consists of threelarge sheets that clearly illustrate all structure as well as showing installation of scale working landing gear and hinges and control horns.
|
Specifications: Scale: 1/3 Inches to the foot: 4" - 1' Length: 84" Weight: 26 - 28 lbs Wing span: 112" Wing incidence at root: Top wing +1 1/2, bottom wing +1 Stab incidence: 0 Dihedral: top wing none, +2 1/2 degrees each bottom panel Power: 62 - 100 cc gas Aileron throws: 1 1/2" up & 3/4" down Elevator throws: 2" up & 2" down Rudder throws: 3" right & 3" left Cowl length: 6" Cowl height front: 6" Cowl height rear: 10" Cowl width front: 6" Cowl width rear: 8 1/2" Engine offset degrees: 0 right 0 down CG location: 6 1/2" back from leading edge of the top wing center section
|
Requires: Fiberglass cowl: yes Engine:62 - 100 cc gas Fuel tank: 24oz square Control Horns: (2) 1/2", (2) 1" Hinges: 13 LG flat hinges Covering: cloth Wheels Main: 7" Wheels Tail: 1 1/2" Radio channels: 4 or more Servos:, Ailerons(2)120+oz BB, Elevators(2)120+oz BB, Rudder(1)120+oz BB, Throttle (1)50oz BB MG-metal gear BB-ball bearing
|