|
|
|
||||||||||||||||||||||||||||||||||||||
A-1 Skyraider Technical Specifications
| Specifications: | Requires: |
|
Scale: 1/6 Inches to the foot: 2.0" - 1' Length: 78" Weight: 30 - 35 lbs Wing loading: 42 - 52 oz/sqft Wing area: 1620 sq.in. Wing span: 100" Wing incidence at root: +2 1/2 degrees Stab incidence: +1 degree Dihedral: 4" under each tip Power: 62 - 85 cc gas Washout at wing tip: 2 to 3 degrees built in with jig Aileron throws: 3/4" up & 5/8" down Elevator throws: 3/4" up & 3/4" down Rudder throws: 2" to right & 2" to left Flap degrees down: 40 - 50 Cowl length: 9" Cowl height front: 8 3/4" Cowl height rear: 10 3/4" Cowl width front: 8 3/4" Cowl width rear: 9 1/2" Engine offset degrees: 0 right, 0 down CG location: 5 1/2" back from leading edge of wing at the fuse with gear down
|
Ziroli cowls and or nose: yes Ziroli canopy: yes Ziroli plastic accessories: yes Engine:62 - 85 cc gas Spinner: 1 1/2" - 2" spinner hub Fuel tank: 32oz rectangle Wing Tube: 1 1/4" X 30" Control Horns: (2) 1/2",(2) 3/4",(2) 1" Hinges: 22 Covering: 1oz fiberglass cloth & epoxy resin Retracts Main: yes Retracts Nose: no Retracts Tail: yes Main gear struts: n/a Tail gear strut: no Air Kit: yes Wheels Main: 5 1/2" Wheel Nose: n/a Wheels Tail: 2" Radio channels: 6 or more Servos: Flaps (2)150-200oz MGBB, Ailerons (2)90+oz BB, Elevators (2)90+oz BB, Rudder (1)120+oz BB, Gear (1)50oz, Throttles (1)50oz BB MG-metal gear BB-ball bearing
|